Luton is located 35 miles North of Central London, just outside the M25 Motorway and 6 miles to the East of J10 of the M1 motorway. Rail access is provided by Luton Parkway station located on the Thameslink line, with a journey time to London St Pancras of 24 minutes.

Volare will provide a Grade A self-contained office building and is located adjacent to the newly refurbished Percival House. It is situated on the main Luton Airport operational aviation site, to the North side of the main runway but is not ‘airside’. Accessed off Prospect Way via Percival Way, it is 0.3 miles to the North of the main access road, Airport Way, which is the dual carriageway leading to both the main passenger terminal and the M1 Motorway.

The building will extend to 11,610 sq ft over four floors, with a floorplate per floor of c. 269 sq m (2,906 sq ft).

The proposed specification includes:

• Floor to ceiling height of 2.8m on office floors
• 150mm fully raised access floor
• VRF air conditioning
• LED motion sensor lighting
• WC facilities on each floor, with disabled WC and shower on the ground floor
• 40 car spaces (1 per 290 sq ft)
• 16 cycle spaces (shared with Percival House)
• Four electric car charging points
• CCTV monitored site

The building has planning permission and can be constructed to suit an occupier's bespoke requirements.